LCD display Fully automatic bypass Extended battery options Remote monitoring capabilities System Monitoring - PowerVision® network software - RS-232 port - SNMP conversion

DC Expert. Monitoring battery life is one of the most challenging aspects of UPS ownership. DC Expert is a built-in battery monitoring system that helps administrators and managers meet the challenges they face. The system provides accurate information on run time and battery health, allowing organizations to avoid load losses due to unexpected battery failure. While competitive battery monitoring systems usually estimate run time with an +/- 20 percent fluctuation in accuracy, DC Expert run time information is accurate within +/- 3 percent. Battery run time is displayed on a large LCD panel located on the front of the system.

Outcall™ Paging /Remote Notify. The Remote Notify system enhances proactive power management, enabling the Powerware Plus to automatically call for help if power or equipment problems occur. Remote Notify is an entry-level notification system in which the Powerware Plus is connected to a phone line via an internal modem. Remote Notify's outbound and inbound call capabilities save valuable time and money by directly notifying a pager or personal computer. This alerts the appropriate network manager or administrator and, in many cases, a problem can be diagnosed and solved without visiting the site.

The Outcall Paging feature allows the Powerware Plus to call as many as two telephone numbers during an emergency. The number of outcalls per event is programmable and the delay time between outcalls is also programmable.

Software. The strong integration of software with Exide Electronics UPS hardware provides additional power protection services for end users. PowerVision management software is designed to monitor Exide Electronics UPS products, providing the most sophisticated alarm management and notification tools available. FORESEER^™'s unique interface capability and performance analysis tools identify dangerous trends, execute corrective action and prevent failures. All Powerware Plus models above 18kVA have these management software capabilities.

12-18 kVA Model 12 - 12kVA/8kW   Model 15 - 15 kVA/10kW   Model 18 - 18kVA/12kW     Input Voltage Range See table below Frequency Range 45-65 Hz Surge Protection Meets IEEE 587/ANSI C62.41, Category A & B Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycle Frequency Regulation (Free Run) +/- 0.1 Hz Frequency Sync Range +/- 1.0 Hz Frequency Slew Rate 1 Hz/sec. Load Crest Ratio 3:1 Common Mode Noise Rejection >100 dB Battery Battery Type Sealed, maintenance-free lead acid Battery Voltage 240 VDC Recharge time 12x discharge to 90% capacity Safety UL 1778 Listed CUL CAN/CSA C22.2NO.107.1-M91 Listed EN 50091-1 All Cabinets provide seismic mounting features Environmental and safety Audible Noise <60 dBA at 1 meter Ambient Operating Temperature 0C to 40C Ambient Storage Temperature -20C to +70C Altitude 5000 ft. (1500 m) without derating Relative Humidity 5-95% minimum non-condensing EMI Suppression Meet FCC Class A, Subpart J of Part 15 Electrostatic Discharge Withstands 25kV without damage or disturbance to load * subject to change without notice. Model Selection Guide   Nominal Voltage* (Line-Line)  Input Voltage Model 12kVA/8kW  Model 15kVA/10kW  Model 18kVA/12kW  Max.  Maximum Rated Current Per Phase  Max.  Maximum Rated Current Per Phase   Max.  Maximum Rated Current Per Phase  Input  Output  Range  kVA  Input  Output  kVA  Input Output  kVA  Input  Output  200 200 176-253  11.7  29A  34A   14.5  36A  42A  17.2  43A  50A  208 208 176-253 12.2 28A 34A  15  35A  42A  18  42A  50A  220 220 176-253 11.8 26A 31A  14.8  33A  39A  17.9  39A  47A     Model 12kVA/8kW HV    Model 15kVA/10kW HV   Model 15kVA/10kW HV  380 380 367-391 12 15A 18A  15  19A  23A  18  23A  27A  400 400 388-412 11.9 14A 17A  15  18A  22A  17.9  22A  26A  415 415 403-427 12 14A 17A  15.6  18A  22A  18  21A  25A  480 480 467-494 11.6 12A 14A  15  15A  18A  18.3  18A  22A  480 208 467-494 11.9 12A 33A  15.1  15A  42A  18  18A  50A * Nominal UPS module input/voltage, i.e If unit is being used as a voltage or frequency converter, the bypass must be disabled. Input/Output voltage, phase and frequency must be equal for bypass operation. Line to neutral voltage=line to line divided by 1.73

Battery Run Times (in minutes)
 

*Estimated accuracy of battery support times is +/-10%.
**EBC1 is one half-full battery cabinet.
***EBC2 is one full battery cabinet.

Home Batteries  UPS Technology Emergency Lighting Battery Chargers Factory Links Contact Us Buy Batteries Online

Power Factor Inc.

800-706-7009

 Our Goal, NO DISSATISFIED CUSTOMERS!

Since 1995

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.